FAQ

Our nipples are specially designed to mimic natural breastfeeding. It gives your child a sense of security, which facilitates the transition from breastfeeding to a baby bottle.

Our nipples fit all our baby bottles 150ml, 250ml and 300ml.

Small (0-3 months): Adapted for breast milk and milk replacement with slow flow.

Medium (3-6 months): Adapted for breast milk and milk replacement and gruel with slightly fast flow.

Variable Plus (6 months +): Adapted for gruel, wholegrain gruel and water with fast flow.  

Our nipples have an integrated anti-colic vent that contributes to a smooth flow. It prevents your child from being affected by gases, colic and reflux.

Our nipples are made of soft food graded silicone that is gentle to your child’s delicate gum. They are also carefully tested to meet our high standards of durability, safety and function. And of course, the nipple is free from BPA, BPS, BPF and phthalates and other substances that can harm your baby.

Before using the nipple for the first time, it needs to be sterilized. We recommend putting the nipple in a large pot of boiling water. Then cover with a lid and let boil for at least 5 minutes.

The nipple is dishwasher safe and withstands high temperature sterilization. If washing by hand, wash the anti-colic nipple thoroughly in fresh water and washing-up liquid. Then rinse in fresh running water to remove all foam and detergent. The nipple should be cleaned after each use. Make sure it dries thoroughly. If any moist remains it can cause mould and fungus.

Store the nipple in an enclosed place at room temperature. Do not leave it in direct sunlight for a long time as it can damage the products.

Always check the nipple and pull in all directions before use. If the nipple has cracks or holes it should be replaced. For safety reasons, the nipple should be changed every two months.

Our spout is made of 100% soft food graded silicone which is gentle to your child’s delicate gum. It is also carefully tested to meet our high standards of durability, safety and function. And of course, the spout is free from BPA, BPS, BPF and phthalates and other substances that can harm your child.

Whether your child prefers to drink upright, on side or upside down, there will be no waste- our spout is guaranteed to be spill-free!

It fits all our bottles except for the water bottle.

Before using the spout for the first time, it needs to be sterilized. We recommend putting the spill-free spout in a large pot of boiling water, then cover with a lid and let boil for at least 5 minutes.

The spout is dishwasher safe and withstands high temperature sterilization. If washing by hand, wash the spill-free spout thoroughly in fresh water and washing-up liquid. Then rinse in fresh running water to remove all foam and detergent. The spout should be cleaned after each use. Make sure it dries thoroughly. If any moist remains it can cause mould and fungus.

Store the spout in an enclosed place at room temperature. Do not leave the spill-free spout in direct sunlight for a long time as it can damage the product.

Always check the spout and pull it in all directions before use. If you see any cracks or other damage it should be replaced. For safety reasons, the spout should be changed every two months.

Our glass baby bottle heat sensing is smart. In addition to having all the adventages that our other glass bottles have, it also shows if the liquid is too hot for your baby (above 40 °C), by changing color. It will return to its original color when the temperature has dropped, is safe and will not harm your baby. Wait at least 30 seconds for the temperature to drop.

No, the glass bottle can still break as it is a glass bottle. However the silicone coating shall prevent it from making a mess on the floor if it breaks.

Our silicone coated baby bottle is made of high quality borosilicate glass. Unlike plastic, glass does not emit harmful substances that plastic does, making glass to the healthiest choice for your baby. In addition, glass is also easy to clean!

Our nipples are specially designed to mimic natural breastfeeding. It gives your child a sense of security, which facilitates the transition from breastfeeding to a baby bottle.

Our heat sensing bottle has been carefully tested to meet our high standards of durability, safety and function. And of course, the bottle is free from BPA, BPS, BPF and phthalates and other substances that can harm your baby.

There is a graduation scale on the back of the bottle that helps you measure the right amount of liquid.

Our nipples have an integrated anti-colic vent that contributes to a smooth flow. It prevents your child from being affected by gases, colic and reflux.

The silicone disc transforms your baby bottle to a bottle container.

Limited, if heating the heat sensing bottle in the microwave it can prematurely fade the colour of the bottle. Therefore we do not recommend to put the heat sensing bottle in the microwave, and if you need to put the bottle in the microwave make sure to take it out from the microwave as soon as possible and not more than maximum 30 seconds.

Before using bottle the first time, it needs to be sterilized. We recommend putting the bottle and its parts in a large pot of boiling water. Then cover with a lid and let boil for at least 5 minutes. After the first time of being sterilized the bottles should only be washed by hand with clean water and soap. The bottles will prematurely fade if sterilizing the heat sensing bottle more than the first time.

After the first use the heat sensing glass bottle should only be washed by hand. Separate the bottle and all its parts (nipple, screw ring, sealing disc, dust cover) from each other. Thoroughly clean part by part in fresh water and washing-up liquid. Then rinse the bottle and its part in fresh running water to remove all foam and detergent. The bottle should be cleaned after each use. Make sure it dries thoroughly. If any moist remains it can cause mould and fungus.

Store the bottle and associated parts in an enclosed place at room temperature. Do not leave the bottle or it parts in direct sunlight for a long time as it can damage the products.

Always check the bottle and pull the nipple in all directions before use. If you see any cracks or breaks on or in the bottle, discard immediately. If the nipple has cracks or holes it should be replaced. For safety reasons, the nipple should be changed every two months.

No, the glass bottle can still break as it is a glass bottle. However, the silicone coating shall prevent it from making a mess on the floor if it breaks. 

Our silicone coated glass baby bottle is made of high quality borosilicate glass. Unlike plastic, glass does not emit harmful substances that plastic does, making glass to the healthy choice for your baby. Glass is also easy to clean!

Our nipples are specially designed to mimic natural breast feeding. It gives your child a sense of security, which facilitates the transition from breastfeeding to a baby bottle.

Our silicone coated glass baby bottle has been carefully tested to meet our high standards of durability, safety and function. And of course, the bottle is free from BPA, BPS, BPF and phthalates and other substances that can harm your baby.

Thanks to the silicone coated glass, which gives a better grip of the surface and the ergonomic designed bottle shape, it makes it easier for your child to hold the bottle by itself.

Our nipples have an integrated anti-colic vent that contributes to a smooth flow. It prevents your child from being affected by gases, colic and reflux.

There is a graduation scale on the back of the bottle that helps you measure the right amount of liquid.

Yes, the glass baby bottle silicone coated withstands microwave.

Before using the bottle at the first time, it needs to be sterilized. We recommend putting the bottle and its parts in a large pot of boiling water, then cover with a lid and let boil for at least 5 minutes.

The glass baby bottle is dishwasher safe and withstands high temperature sterilization. When cleaning the bottle, whether it is by hand, in a dishwasher or by sterilization, it is necessary to take (nipple, screw ring, sealing disc, dust cover) apart and wash each part separately. If washing by hand, wash each part thoroughly in fresh water and washing-up liquid. Then rinse the bottle and its part in fresh running water to remove all foam and detergent. The glass baby bottle silicone coated should be cleaned after each use. Make sure it dries thoroughly. If any moist remains it can cause mould and fungus.

Store the bottle and associated parts in an enclosed place at room temperature. Do not leave the bottle or it parts in direct sunlight for a long time as it can damage the products.

Always check the bottle and pull the nipple in all directions before use. If you see any cracks or breaks in the bottle, discard immediately. If the nipple has cracks or holes it should be replaced. For safety reasons, the nipple should be changed every two months.

No, the Sippy Cup can still break as it is a glass bottle. However, the silicone coating shall prevent it from making a mess on the floor if it breaks. 

Our silicone coated Sippy Cup is made of high-quality borosilicate glass. Unlike plastic, glass does not emit harmful substances, making glass the healthiest choice for your child. Glass is also very easy to clean!

Whether your child prefers to drink upright, on side or upside down, there will be no waste- our spout is guaranteed to be spill-free!

Our Sippy Cup has been carefully tested to meet our high standards of durability, safety and function. And of course, the Sippy is free from BPA, BPS, BPF and phthalates and other substances that may harm your child. In addition, the spout is made of 100% soft medical silicone which is gentle on your child’s delicate gum.

Before using the Sippy Cup for the first time, it needs to be sterilized. We recommend putting the bottle and its parts (screw ring, handle, and spout) separated in a large pot of boiling water, then cover with a lid and let boil for at least 5 minutes.

The Sippy Cup is dishwasher safe and withstands high temperature sterilization. When cleaning the bottle, whether it is by hand, in a dishwasher or by sterilization, it is necessary to take it apart and wash each part separately. If washing by hand, wash each part thoroughly in fresh water and washing-up liquid. Then rinse the bottle and its part in fresh running water to remove all foam and detergent. The bottle should be cleaned after each use. Make sure it dries thoroughly. If any moist remains it can cause mould and fungus.

Store the bottle and associated parts in an enclosed place at room temperature. Do not leave the bottle or it parts in direct sunlight for a long time as it can damage the products.

Always check the Sippy Cup and pull the spout in different directions before use. If you see any cracks in the bottle, discard immediately. If the spout is damaged it should be replaced. For safety reasons, the spout should be changed every two months.

No, the glass bottle can still break as it is a glass bottle. However, the silicone coating shall prevent it from making a mess on the floor if it breaks. 

Our silicone coated glass straw bottle is made of high-quality borosilicate glass. Unlike plastic, glass does not emit harmful substances, making glass the healthiest choice for your child. Glass is also very easy to clean!

Whether your child prefers to drink upright, on side or upside down, there will be no waste- our straw bottle is guaranteed to be spill-free!

Our straw bottle has been carefully tested to meet our high standards of durability, safety and function. And of course, the bottle is free from BPA, BPS, BPF and phthalates and other substances that may harm your child. In addition, the mouthpiece and straw are made of 100% soft medical silicone which is gentle on your child’s delicate gum.

Yes, the straw bottle withstands microwave.

Before using the straw bottle for the first time, it needs to be sterilized. We recommend putting the bottle and its parts (screw ring, mouthpiece and straw) separated in a large pot of boiling water. Then cover with a lid and let boil for at least 5 minutes.

The straw bottle is dishwasher safe and withstands high temperature sterilization. When cleaning the bottle, whether it is by hand, in a dishwasher or by sterilization, it is necessary to take (screw ring, mouthpiece and straw) apart and wash each part separately. If washing by hand, wash each part thoroughly in fresh water and washing-up liquid. Then rinse the bottle and its part in fresh running water to remove all foam and detergent. The bottle should be cleaned after each use. Make sure it dries thoroughly. If any moist remains it can cause mould and fungus.

Store the bottle and associated parts in an enclosed place at room temperature. Do not leave the bottle or it parts in direct sunlight for a long time as it can damage the products.

Always check the straw bottle and pull the mouthpiece and straw in different directions before use. If you see any cracks in the bottle, discard immediately. If the mouthpiece or straw are damage it should be replaced. For safety reasons, the straw set should be changed every two months.

Everyday Baby’s silicone bib with belt is the perfect result after well thought out choices of material, design and function. With a smart pocket and side walls that effectively collect food waste, both clothes and floors are kept clean.

Silicone is a material that reduces the risk of bacterial production because it does not absorb water. In addition, silicone does not emit harmful substances like plastic does.

Our bib is made of 100% premium quality silicone. Like our other products, it is tested to meet our high standards of durability, safety and function. And of course, the bib is free from BPA, BPS, BPF and phthalates and other substances that can harm your child.

Thanks to the two-way fastened belt, the bib stays on stably even if your child moves a lot.

The bib can be used for a long time. With adjustable straps, it is flexible in size and can be adjusted as your child grows. Suitable for children from 4 months up to 4 years.

It should be easy to be on the move. Our bib is foldable and becomes so small that it barely takes up any space in your bag.

Before using the bib for the first time, it needs to be sterilized. We recommend putting the bib in a large pot of boiling water, then cover with a lid and let boil for at least 5 minutes.

The bib is dishwasher safe and withstands high temperature sterilization. If washing by hand, wash the bib thoroughly in fresh water and washing-up liquid. Then rinse in fresh running water to remove all foam and detergent. The bib should be cleaned after each use. Make sure it dries thoroughly. If any moist remains it can cause mould and fungus.

Store the bib in an enclosed place at room temperature. Do not leave the bib in direct sunlight for a long time as it can damage the product.

Always check the bib before use. If you see any cracks or other damage to the bib, discard immediately.

Silicone is a material that reduces the risk of bacterial production because it does not absorb water. In addition, silicone does not emit harmful substances as plastic does.

Our silicone spoon is the best and safest choice for when your child starts eating solid food. The spoon’s soft tip of silicone is specially designed to be gentle to your baby’s delicate gum. Like our other products, it is tested to meet our high standards of durability, safety and function- all in order for you to feel confident that your child is getting the best. And of course, the spoon is free from BPA, BPS, BPF and phthalates and other substances that can harm your baby.

The spoon has a neat but sturdy handle thanks to the metal core inside the handle part, which makes it perfect to stir with as well as for you to reach all the way down in the food jar. With its ergonomic design, the spoon lays perfectly in your hand when feeding your baby.

Before using the spoon for the first time, it needs to be sterilized. We recommend putting the spoon in a large pot of boiling water, then cover with a lid and let boil for at least 5 minutes.

The spoon is dishwasher safe and withstands high temperature sterilization. If washing by hand, wash the spoon thoroughly in fresh water and washing-up liquid. Then rinse in fresh running water to remove all foam and detergent. The spoon should be cleaned after each use. Make sure it dries thoroughly. If any moist remains it can cause mould and fungus.

Store the spoon in an enclosed place at room temperature. Do not leave the spoon in direct sunlight for a long time as it can damage the product.

Always check the spoon before use. If you see any damage to the spoon, discard immediately.

Silicone is a material that reduces the risk of bacterial production because it does not absorb water. In addition, silicone does not emit harmful substances as plastic does.

Our silicone bowl with suction function is made of 100% premium quality silicone and is the safest choice for when your child should start eating on its own. Like our other products, it is tested to meet our high standards of durability, safety and function- all in order for you to feel confident that your child is getting the best. And of course, the bowl is free from BPA, BPS, BPF and phthalates and other substances that can harm your child.

Yes, the bowl fits on all highchairs with a tray table.

Our silicone bowl has a smart suction cup on the bottom of the bowl that makes it stick to the table surface, which makes the bowl stay in place and facilitates when your child learns to eat by itself. To enhance suction and help keep the seal tight, be sure to firmly press the center of the suction cup all the way and keep firm pressure to ensure all the air bubbles inside are released and a vacuum is created to firmly seal the cup to the surface.

The bowl attaches to most table materials with a smooth surface. Make sure that the surface that it’s suppose to stick to is a flat/polished material. For example, most of the high chair tray’s on market works fine. 

Some surfaces don’t work well for suction cups. Before application, start with a clean surface, and make sure it’s completely smooth and even- not rough or textured. Suction cups stick better when they are completely clean and dry. Then make sure that you press firmly from the middle inside to ensure that no air bubbles are trapped between the surfaces and there is a tight seal to create the vacuum suction. Like all suction cups it’s weaker sideways. The suction plug is strong upwards, but laterally ours as well as other suction plugs, are not as strong and even a child can move it sideways but still not lift it up.

To remove or re-position the cup, it can easily be released by simply individually pulling the easy-release tab to break the suction. This eliminates damage to the cup edge.

With the bowl’s tilted bottom, it is easier for your child to grab even the very last of the food.

Before using the bowl for the first time, it needs to be sterilized. We recommend putting the bowl in a large pot of boiling water, then cover with a lid and let boil for at least 5 minutes.

Yes, the bowl withstands microwave.

The bowl is dishwasher safe and withstands high temperature sterilization. If washing by hand, wash the bowl thoroughly in fresh water and washing-up liquid. Then rinse in fresh running water to remove all foam and detergent. The bowl should be cleaned after each use. Make sure it dries thoroughly. If any moist remains it can cause mould and fungus.

Store the bowl in an enclosed place at room temperature. Do not leave the bowl in direct sunlight for a long time as it can damage the product.

Always check the bowl before use. If you see any cracks or other damage to the bowl, discard immediately.

Silicone is a material that reduces the risk of bacterial production because it does not absorb water. In addition, silicone does not emit harmful substances as plastic does.

Our silicone plate with suction function is made of 100% premium quality silicone and is designed to make the meal as smooth as possible for you and your child. Like our other products, it is tested to meet our high standards of durability, safety and function- all in order for you to feel confident that your child is getting the best. And of course, the plate is free from BPA, BPS, BPF and phthalates and other substances that can harm your child.

Yes, the plate fits on all highchairs with a tray table.

Our silicone plate has a smart suction cup on the bottom which makes it stick to the table surface, which makes the plate sit in place and facilitates when your child will learn to eat by itself. To enhance suction and help keep the seal tight, be sure to firmly press the center of the suction cup all the way and keep firm pressure to ensure all the air bubbles inside are released and a vacuum is created to firmly seal the cup to the surface.

The plate attaches to most table materials with a smooth surface. Make sure that the surface that it’s suppose to stick to is a flat/polished material. For example, most of the high chair tray’s on market works fine. 

Some surfaces don’t work well for suction cups. Before application, start with a clean surface, and make sure it’s completely smooth and even- not rough or textured. Suction cups stick better when they are completely clean and dry. Then make sure that you press firmly from the middle inside to ensure that no air bubbles are trapped between the surfaces and there is a tight seal to create the vacuum suction. Like all suction cups it’s weaker sideways. The suction plug is strong upwards, but laterally ours as well as other suction plugs, are not as strong and even a child can move it sideways but still not lift it up.

To remove or re-position the cup, it can easily be released by simply individually pulling the easy-release tab to break the suction. This eliminates damage to the cup edge.

The plate’s practical division into four sections facilitates eating for your child, but also for you when you are preparing and organizing the food.

Before using the plate for the first time, it needs to be sterilized. We recommend putting the plate in a large pot of boiling water, then cover with a lid and let boil for at least 5 minutes.

Yes, the plate withstands microwave.

The plate is dishwasher safe and withstands high temperature sterilization. If washing by hand, wash the plate thoroughly in fresh water and washing-up liquid. Then rinse in fresh running water to remove all foam and detergent. The plate should be cleaned after each use. Make sure it dries thoroughly. If any moist remains it can cause mould and fungus.

Store the plate in an enclosed place at room temperature. Do not leave the plate in direct sunlight for a long time as it can damage the product.

Always check the plate before use. If you see any cracks or other damage to the plate, discard immediately.

Children grow quickly and when your child can drink by itself, you can easily replace the nipple of the baby bottle with the silicone straw set, so that it becomes a straw bottle instead. The silicone straw set comes with 2 different lengths, fits all our baby bottles and extends their usefulness.

Silicone is a material that reduces the risk of bacterial production because it does not absorb water. In addition, silicone does not emit harmful substances as plastic does.

Whether your child prefers to drink upright, on side or upside down, there will be no waste- our straw set is guaranteed to be spill-free!

Our straw set is carefully tested to meet our high standards of durability, safety and function. And of course, the straw set is free from BPA, BPS, BPF and phthalates and other substances that can harm your child. In addition, the straw set is made of 100% soft medical silicone which is gentle to your child’s delicate gum.

It fits all our bottles except for the water bottle.

No need to choose, one package contains one mouthpiece and 2 straws of different lengths.

Before using the straw set for the first time, it needs to be sterilized. We recommend putting the straw set in a large pot of boiling water, then cover with a lid and let boil for at least 5 minutes.

The straw set is dishwasher safe and withstands high temperature sterilization. If washing by hand, wash the straw set thoroughly in fresh water and washing-up liquid. Then rinse in fresh running water to remove all foam and detergent. The straw set should be cleaned after each use. Make sure it dries thoroughly. If any moist remains it can cause mould and fungus.

Store the straw set in an enclosed place at room temperature. Do not leave the straw set in direct sunlight for a long time as it can damage the product.

Always check the straw set before use. If you see any cracks or other damage it should be replaced. For safety reasons, the straw set should be changed every two months.

Silicone is a material that reduces the risk of bacterial production because it does not absorb water. In addition, silicone does not emit harmful substances as plastic does.

Our silicone bowl is made of 100% premium quality silicone and is the safest choice for when your child should start eating on its own. Like our other products, it is tested to meet our high standards of durability, safety and function- all in order for you to feel confident that your child is getting the best. And of course, the bowl is free from BPA, BPS, BPF and phthalates and other substances that can harm your child.

Yes, the bowl is small and fits for handheld use. They’re also stackable, making storage easy! 

Thanks to the smart scale guide on the inside of the bowl, you can easily measure the right amount of food for your child.

Before using the bowl for the first time, it needs to be sterilized. We recommend putting the bowl in a large pot of boiling water, then cover with a lid and let boil for at least 5 minutes.

Yes, the baby bowl withstands microwave.

The bowl is dishwasher safe and withstands high temperature sterilization. If washing by hand, wash the bowl thoroughly in fresh water and washing-up liquid. Then rinse in fresh running water to remove all foam and detergent. The bowl should be cleaned after each use. Make sure it dries thoroughly. If any moist remains it can cause mould and fungus.

Store the bowl in an enclosed place at room temperature. Do not leave the bowl in direct sunlight for a long time as it can damage the product.

Always check the bowl before use. If you see any cracks or other damage to the bowl, discard immediately.

Children are growing fast and soon it is time to leave the baby bottle to start drinking from a cup. But you don’t have to buy everything new. With our easy grip handle you turn the baby bottle into a cup in an instant.

It fits all our bottles (except the water bottle) and most wide-neck bottles on the market.

Our handles have been carefully tested to meet our high standards of durability, safety and function. The handles are of course free of PVC and other substances that can harm your child.

Our handles ergonomic design makes it easy to grip and therefore easy for your child to hold.

Before using the handle for the first time, it needs to be sterilized. We recommend putting the easy grip handle in a large pot of boiling water, then cover with a lid and let boil for at least 5 minutes.

Yes, the handle withstands microwave.

The handle is dishwasher safe and withstands high temperature sterilization. When cleaning the handle, whether it is by hand, in a dishwasher or by sterilization, separate from the bottle. Clean thoroughly in fresh water and washing-up liquid. Then rinse in fresh running water to remove all foam and detergent. Make sure it dries thoroughly. If any moist remains it can cause mould and fungus.

Store the easy grip handle in an enclosed place at room temperature. Do not leave the handle in direct sunlight for a long time as it can damage the product.

Yes, the Sippy Cup withstands microwave.

Always check the handle before use. If you see any cracks or other damage to the handle, discard immediately. 

Silicone is a material that reduces the risk of bacterial production because it does not absorb water. In addition, silicone does not emit harmful substances as plastic does. The soft Silicone Cup has smooth edges that protect the baby’s developing teeth.

Our silicone cup is made of 100% premium quality silicone and is the safest choice for when your child should start eating on its own. Like our other products, it is tested to meet our high standards of durability, safety and function- all in order for you to feel confident that your child is getting the best. And of course, the cup is free from BPA, BPS, BPF and phthalates and other substances that can harm your child.

The cup is designed with a wide base for stability and the with the smart design it lays perfectly in hand, making it comfortable for you toddler to hold.

Before using the cup for the first time, it needs to be sterilized. We recommend putting the cup in a large pot of boiling water, then cover with a lid and let boil for at least 5 minutes.

Yes, the cup withstands microwave.

The cup is dishwasher safe and withstands high temperature sterilization. If washing by hand, wash the cup thoroughly in fresh water and washing-up liquid. Then rinse in fresh running water to remove all foam and detergent. The cup should be cleaned after each use. Make sure it dries thoroughly. If any moist remains it can cause mould and fungus.

Store the cup in an enclosed place at room temperature. Do not leave the cup in direct sunlight for a long time as it can damage the product.

Because of the durable material it can be reused for a long time. Always check the cup before use. If you see any cracks or other damage to the product, discard immediately.

Silicone is a material that reduces the risk of bacterial production because it does not absorb water. In addition, silicone does not emit harmful substances as plastic does.

Our Silicone Plate is made of 100% premium quality silicone and is designed to make the meal as smooth as possible for you and your child. Like our other products, it is tested to meet our high standards of durability, safety and function- all in order for you to feel confident that your child is getting the best. And of course, the plate is free from BPA, BPS, BPF and phthalates and other substances that can harm your child.

Yes, the plate fits on all highchairs with a tray table.

Our silicone plate is designed with a weighted base. It gives stability and prevents tipping. which makes the plate sit in place and facilitates when your child will learn to eat by itself.

Before using the plate for the first time, it needs to be sterilized. We recommend putting the plate in a large pot of boiling water, then cover with a lid and let boil for at least 5 minutes.

Yes, the plate withstands microwave.

The plate is dishwasher safe and withstands high temperature sterilization. If washing by hand, wash the plate thoroughly in fresh water and washing-up liquid. Then rinse in fresh running water to remove all foam and detergent. The plate should be cleaned after each use. Make sure it dries thoroughly. If any moist remains it can cause mould and fungus.

Store the plate in an enclosed place at room temperature. Do not leave the plate in direct sunlight for a long time as it can damage the product.

Always check the plate before use. If you see any cracks or other damage to the plate, discard immediately.

Silicone is a material that reduces the risk of bacterial production because it does not absorb water. In addition, silicone does not emit harmful substances as plastic does.

In addition to being non-toxic, eco-friendly, and durable, there is many advantages. For example, our silicone straw is resistant to heat conduction, it doesn’t get hot with hot beverages or freezes with smoothies or milkshakes (unlike stainless steel metal straws). You can even cut the straws to adapt them perfectly to your cups, mugs or glasses!

Straws are not suitable for children under 6 months.

Our straw is carefully tested to meet our high standards of durability, safety and function. And of course, the straw set is free from BPA, BPS, BPF and phthalates and other substances that can harm your child.

No need to choose, the straws can be cut to different lengths.

Before using the straw for the first time, it needs to be sterilized. We recommend putting the straws in a large pot of boiling water, then cover with a lid and let boil for at least 5 minutes.

The straw is dishwasher safe and withstands high temperature sterilization. If washing by hand, wash the straw thoroughly in fresh water and washing-up liquid. Then rinse in fresh running water to remove all foam and detergent. The straw should be cleaned after each use. Make sure it dries thoroughly. If any moist remains it can cause mould and fungus.

Store the straws in an enclosed place at room temperature. Do not leave the straws in direct sunlight for a long time as it can damage the product.

Always check the straw set before use. If you see any cracks or other damage it should be replaced.

Silicone is a material that reduces the risk of bacterial production because it does not absorb water. In addition, silicone does not emit harmful substances as plastic does. Everyday Baby Silicone Teether is soft and kind to your baby's gums and cleans the area as your baby chews.

In addition to being non-toxic, our silicone teether has various textures which provide soothing comfort and help to soothe and stimulate the eruption of your baby’s new teeth. You can also put it in a freezer to cool.

Thanks to the ergonomic design the teether is a perfect size and shape for little hands to hold. It is designed for the baby to firmly grip and chew their teether with ease. 

Our teether is carefully tested to meet our high standards of durability, safety and function. And of course, the silicone teether is free from BPA, BPS, BPF and phthalates and other substances that can harm your child.

Before using the teether for the first time, it needs to be sterilized. We recommend putting the teether in a large pot of boiling water, then cover with a lid and let boil for at least 5 minutes.

The teether is dishwasher safe and withstands high temperature sterilization. If washing by hand, wash the teether thoroughly in fresh water and washing-up liquid. Then rinse in fresh running water to remove all foam and detergent. The teether should be cleaned after each use. Make sure it dries thoroughly. If any moist remains it can cause mould and fungus.

Store the teether in an enclosed place at room temperature. Do not leave the teether in direct sunlight for a long time as it can damage the product.

Always check the teether before use. If you see any cracks or other damage it should be replaced.

Our cutlery set is made of stainless steel and silicone. Like our other products, they are tested to meet our high standards of durability, safety and function- all in order for you to feel confident that your child is getting the best. And of course, the cutlery set is free from       BPA, BPS, BPF and phthalates and other substances that can harm your child.

With our cutlery set it is easier for your child to learn to eat by itself. The cutlery’s ergonomic design encourages a natural grip right from the beginning and with the handle’s soft silicone cover, they are also comfortable to hold.

Before using the cutlery set for the first time, it needs to be sterilized. We recommend putting the cutlery set in a large pot of boiling water, then cover with a lid and let boil for at least 5 minutes.

The cutlery set is dishwasher safe and withstands high temperature sterilization. If washing by hand, wash the cutlery set thoroughly in fresh water and washing-up liquid. Then rinse in fresh running water to remove all foam and detergent. The cutlery set should be cleaned after each use. Make sure it dries thoroughly.

Store the cutlery set in an enclosed place at room temperature. Do not leave the cutlery set in direct sunlight for a long time as it can damage the product.

Always check the cutlery set before use. If you see any cracks or other damage, discard immediately.